Single conveyors - Type CT 300 slot down, chain pitch 300mm

Information:
Single conveyors are used for transport of mass produced goods going through the same process, e.g. painting lines.

The products are suspended in a cardanchain running in a C-track. The cardanchain is capable of running in horizontal and vertical bends.

The cardanchain is pulled around in the system by a driving unit mounted with an electrical gear motor, which is often connected to a frequency converter for infinitely variable speed.

For larger chain lengths (200 mtr.) additional driving units are required to pull the chain.

All the driving units in a system are connected to 1 frequency converter.

The systems are built up of the following standard components:
- Cardanchain
- Straight track
- Horizontal bends min. radius 700 mm
- Vertical bends min. radius 1250 mm
- Driving unit with gear motor
- Tension station, automatic
- Mounting profile for cardanchain
- Inspection piece
- Expansion piece for oven
- Automatic lubricator for lubricating the cardanchain.
- Turning device
- The chain is often mounted with turning devices, which
- automatically turn the products continuously or e.g. 4x90°
- during transport through a spray booth.

Max. load:
Max. load each product 100 kg, though max. 100 kg per mtr.
Coupling the chain with a traverse beam, max. load 300 kg.

Max. temperature:
270°C.

Preview:

Type CT 300 slot down layout on screen

[ 105 kb ]

Images:

Type CT 300 slot down
[ 136 kb ]